Products in Južná Kórea

Upresniť výber:
Späť
Upresniť výber

Podľa činnosti

Podľa krajiny

All countries 
Zoznámte sa s našimi poprednými klientmi

2GBS for Carbon Steels cutting | 2GBS Drills

K-Drill : 2GBS - Flute GBS Drill * Application : the best performance when drillng S45C, SCM, cast s...

COGO TOOL CO.,LTD.

K-Drill : 2GBS - Flute GBS Drill * Application : the best performance when drillng S45C, SCM, cast steels and cast iron etc. of automobile parts. • FLUTE design considering optimal tool stiffness and ...

2WSB for stainless steel cutting | high hardness End Mills

S-hard : 2WSB - 2Flutes SHORT BALL Endmill * Pre-hardened steels can be applied to medium to high ha...

COGO TOOL CO.,LTD.

S-hard : 2WSB - 2Flutes SHORT BALL Endmill * Pre-hardened steels can be applied to medium to high hardness work pieces. (HRC40~62) • Dividin and double flute make it easy to prevent shaking and chip e...

2HOB na rezanie medi Koncovky na meď

K-COPPER: 2HOB - 2 drážky, 45 ° skrutkové frézy s guľovým koncom pre meď * Frézy pre meď, zliatinu m...

COGO TOOL CO.,LTD.

K-COPPER: 2HOB - 2 drážky, 45 ° skrutkové frézy s guľovým koncom pre meď * Frézy pre meď, zliatinu medi, neželezné a nekovové materiály. • Zlepšiť odolnosť proti opotrebeniu a vyhnúť sa namáhaniu hrán...

2GSS ,Solid Carbide Drill

K DRILL: 2GSS Solid Caride Drill, Straight shank It is suitable for a wide range of workpiece materi...

COGO TOOL CO.,LTD.

K DRILL: 2GSS Solid Caride Drill, Straight shank It is suitable for a wide range of workpiece materials such as cast steel, cast iron, non-ferrous metals and plastics by using high-grade tungsten carb...

4BRE for Heat Treated Steels | B HARD Rib Endmills

B-HARD : 4BRE - Rib Endmills (4Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) • D...

COGO TOOL CO.,LTD.

B-HARD : 4BRE - Rib Endmills (4Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) • Designed for high speed cutting of hardened steels over HRc52. • Maximize the wear-resistance due to ...

Frézy s tvrdým koncom B | 2BCB pre kalenú oceľ pri rezaní HRC70

B-HARD: 2BCB-2Lutuje štandardné guľové frézy * Frézy pre kalené a kalené ocele (HRC52 ~ 70) • Navrhn...

COGO TOOL CO.,LTD.

B-HARD: 2BCB-2Lutuje štandardné guľové frézy * Frézy pre kalené a kalené ocele (HRC52 ~ 70) • Navrhnuté pre vysokorýchlostné rezanie kalených ocelí cez HRc52. • Maximalizujte odolnosť proti opotrebeni...

4KEM pre kalenú oceľ pri rezaní HRC60 Tvrdé frézy

K-HARD: 4KEM-4 drážky, 43 ° štvorcové frézy * Frézy pre kalené a kalené ocele (HRC52 ~ 60) • Navrhnu...

COGO TOOL CO.,LTD.

K-HARD: 4KEM-4 drážky, 43 ° štvorcové frézy * Frézy pre kalené a kalené ocele (HRC52 ~ 60) • Navrhnuté pre vysokorýchlostné rezanie kalenej ocele nad HRc50. • Maximalizujte odolnosť proti opotrebeniu ...

2WCB for Heat treated steel / SUS | S HARD Stamdard Ball

S-HARD : 2WCB - Ball Endmill (2FLUTES) * Pre-hardened steels can be applied to medium to high hardne...

COGO TOOL CO.,LTD.

S-HARD : 2WCB - Ball Endmill (2FLUTES) * Pre-hardened steels can be applied to medium to high hardness work pieces. / HRC40 ~ 62 • Dividing and double flute make it eassy to prevent shaking and chip e...

2MFD &2MFL Flat drill

K DRILL : 2MFD, 2MFL Carbide 2 Flutes, Multi-processing Flat Drill, Long Drill *Flat drill for mater...

COGO TOOL CO.,LTD.

K DRILL : 2MFD, 2MFL Carbide 2 Flutes, Multi-processing Flat Drill, Long Drill *Flat drill for material below HRC50, pre-hardened steel, alloy steel, cast iron and aluminum. *With flat type of end fac...

4VSU Variable Helix Endmills for SUS

K SUS: 4VSU 4 Flutes Variable Helix End Mills for SUS *Endmills for alloy steel, SUS, Ti/Ni base all...

COGO TOOL CO.,LTD.

K SUS: 4VSU 4 Flutes Variable Helix End Mills for SUS *Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials. *JCRO coating provides wear resistance improvement as well as...

4DRC for Carbon, Alloy, Prehardened, Heat Treaded Steels + Copper | Corner Rounding Cutter

K-GENERAL : 4DRC - Corner Rounding Cutter (4Flutes) * Hardened steel(HRC52), pre-hardened steel, too...

COGO TOOL CO.,LTD.

K-GENERAL : 4DRC - Corner Rounding Cutter (4Flutes) * Hardened steel(HRC52), pre-hardened steel, tool steel and cast iron • High precise edge tolerance. • Very nice work surface finish. To purchase a ...

3AHF mirror finishing endmill for aluminum

K ALUMINUM: 3AHF 3 Flutes Mirror Finishing Cutting End Mills for Aluminum *Endmills for Aluminum, AL...

COGO TOOL CO.,LTD.

K ALUMINUM: 3AHF 3 Flutes Mirror Finishing Cutting End Mills for Aluminum *Endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials. *By 25° helix flute edge design with the after-treat...

3AHE na rezanie hliníka Hliníkové čelné frézy

K-HLINÍK: 3AHE-3 drážky, 45 ° skrutkové čelné frézy na hliník * Frézy pre hliník, zliatinu AL, nežel...

COGO TOOL CO.,LTD.

K-HLINÍK: 3AHE-3 drážky, 45 ° skrutkové čelné frézy na hliník * Frézy pre hliník, zliatinu AL, neželezné a nekovové materiály. • Aplikovaný ultra jemný WC stupeň (0,2㎛) pre vynikajúcu povrchovú úpravu...

2BRB for Heat Treated Steels | B HARD Rib Ball Endmills

B-HARD : 2BRB - Rib Ball Endmills (2Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70...

COGO TOOL CO.,LTD.

B-HARD : 2BRB - Rib Ball Endmills (2Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) • Designed for high speed cutting of hardened steels over HRc52. • Maximize the wear-resistance du...

2KSB for Prehardened Steels, Heat Treated Steels | K HARD Short Ball

K-HARD : 2KSB - Short Ball Endmill (2FLUTES) * Endmills for pre-hardened and hardened steel (HRC52 ~...

COGO TOOL CO.,LTD.

K-HARD : 2KSB - Short Ball Endmill (2FLUTES) * Endmills for pre-hardened and hardened steel (HRC52 ~ 60) • Designed for high speed cutting of hardened steels over HRc52. • Maximize the wear-resistance...

2WCR | S HARD Corner Radius Endmills

S - HARD : 2WCR - Corner Radius Endmills (2Flutes) * Pre-hardened steels can be applied to medium to...

COGO TOOL CO.,LTD.

S - HARD : 2WCR - Corner Radius Endmills (2Flutes) * Pre-hardened steels can be applied to medium to high hardness work pieces. / HRC40~62 • Dividing and double flute make it easy to prevent saking an...

4TSR, 4TSC T-Slot Cutter

K GENERAL: 4TSR, 4TSC 4 Flutes T-R Slot Cutter *Endmills for various work materials, hardened steel(...

COGO TOOL CO.,LTD.

K GENERAL: 4TSR, 4TSC 4 Flutes T-R Slot Cutter *Endmills for various work materials, hardened steel(HRC~50), pre-hardened steel,tool steel and cast iron. *Minimize edge chipping by applying straight 4...

4BCE fpr Heat Treated Steels | B HARD Square Endmills

B-HARD : 4BCE - Square Endmills (4Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) ...

COGO TOOL CO.,LTD.

B-HARD : 4BCE - Square Endmills (4Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) • Designed for high speed cutting of hardened steels over HRc52. • Maximize the wear-resistance due ...

4FCE for Alloy Steels | K BLUE Finishing Endmill

K-BLUE : 4FCE - Roughing and Finishing Endmill (4FLUTES) * Structure which facilitates at the same t...

COGO TOOL CO.,LTD.

K-BLUE : 4FCE - Roughing and Finishing Endmill (4FLUTES) * Structure which facilitates at the same time process of roughing and finishing / 4Flutes • Possible to process roughing and finishing at the ...

4TNA Helix Nick Type Thread Mill

K-THREAD MILL : 4TNA 4 Flutes Helix Nick Type Thread Mill for Aluminum *Thread mill for Aluminum, Al...

COGO TOOL CO.,LTD.

K-THREAD MILL : 4TNA 4 Flutes Helix Nick Type Thread Mill for Aluminum *Thread mill for Aluminum, Aluminum alloy, non-ferrous and non-metallic materials. *High spindle speed and feed per tooth are ava...

4WCE for Heat treated steel / SUS | S HARD Square Endills

S-HARD : 4WCE - Corner Radius Endmills. (2Flutes) * Pre-hardened steels can be applied to medium to ...

COGO TOOL CO.,LTD.

S-HARD : 4WCE - Corner Radius Endmills. (2Flutes) * Pre-hardened steels can be applied to medium to high hardness work pieces.(HRC40~62) • Dividing and double flute make it easy to prevent shaking and...

5&6 MTR Trochoidal Milling End Mills

K-MULTI : 5&6MTR 5&6 Flutes Trochoidal Milling End Mills *Roughing Endmills for alloy steel,...

COGO TOOL CO.,LTD.

K-MULTI : 5&6MTR 5&6 Flutes Trochoidal Milling End Mills *Roughing Endmills for alloy steel,inconel, soft steel, SUS and various hard to cut materials. *HR coating reduces stress of flute and ...

K-ABS End Mills | 1NEM for Acryl, ABS, Aluminum, Endmills

K- ABS : 1Flute Endmills * Endmills for Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materia...

COGO TOOL CO.,LTD.

K- ABS : 1Flute Endmills * Endmills for Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials • Excellent chip removing by a helix flute design. • Optimum for cut-off and wall machining.

4ESE for Carbon + Alloy + Prehardened Steels | K BLUE Endmills for Heavy cuts

K-BLUE : 4ESE - Endmills for Heavy cuts (4Flutes) * Endmills for various work materials(~HRC52),pre-...

COGO TOOL CO.,LTD.

K-BLUE : 4ESE - Endmills for Heavy cuts (4Flutes) * Endmills for various work materials(~HRC52),pre-hardened steel, carbon steel, mold steel, SUS, Ti/Ni-base alloy, Inconel • Good wear resistance by h...

2DBL na rezanie grafitu Grafitové frézy

K-GRAPHITE: 2DBL-2 drážkové diamantové guľové frézy pre grafit * Frézy pre grafit, vystužené plasty,...

COGO TOOL CO.,LTD.

K-GRAPHITE: 2DBL-2 drážkové diamantové guľové frézy pre grafit * Frézy pre grafit, vystužené plasty, uhlíkové vlákna, neželezné a nekovové materiály. • Široký sortiment výrobkov pripravený pre rôzne t...

8ECP end mills for composite

K-COMPOSITE : 8~12ECP 8~12 Flutes Finishing End Mills for Composite *Endmills for CFRP, GFRP, glass/...

COGO TOOL CO.,LTD.

K-COMPOSITE : 8~12ECP 8~12 Flutes Finishing End Mills for Composite *Endmills for CFRP, GFRP, glass/carbon fiber, graphite, nonferrous and non-metallic materials. *Outstanding performance in machining...

2WCE pre rezanie z nehrdzavejúcej | vysoká tvrdosť Koniec Mlyny

Tvrdý: 2WCE - 2Flutes Standard Endmill * Predtvrdené ocele môžu byť aplikované na obrobky strednej a...

COGO TOOL CO.,LTD.

Tvrdý: 2WCE - 2Flutes Standard Endmill * Predtvrdené ocele môžu byť aplikované na obrobky strednej až vysokej tvrdosti. (HRC40~62) • Dividin a ddouble flauta uľahčujú prevenciu trasenia a vysypania tr...

4FNR | K BLUE Finishing Endmill

K-BLUE : 4FCE - Roughing and Finishing Endmill (4FLUTES) * Structure which facilitates at the same t...

COGO TOOL CO.,LTD.

K-BLUE : 4FCE - Roughing and Finishing Endmill (4FLUTES) * Structure which facilitates at the same time process of roughing and finishing / 4Flutes • Possible to process roughing and finishing at the ...

2HGB for Carbon, Alloy, Prehardened Steels | Ball Endmills for Generality

K-GSERIES : 2HGB - Standard Length Ball Endmills for Generality (2Flutes) * Endmills for various wor...

COGO TOOL CO.,LTD.

K-GSERIES : 2HGB - Standard Length Ball Endmills for Generality (2Flutes) * Endmills for various work materials(~HRC52), pre-hardened steel, carbon steel, mold steel • High precise edge tolerance. • M...

2BRE for Heat Treated Steels | B HARD Rib Endmills

B-HARD : 2BRE - Rib Endmills (2Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) • D...

COGO TOOL CO.,LTD.

B-HARD : 2BRE - Rib Endmills (2Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) • Designed for high speed cutting of hardened steels over HRc52. • Maximize the wear-resistance due to ...
Naspäť hore